Part Number Hot Search : 
CONTROLS VAL1Z D30N03 MB95400 UCC20225 C3904 SB104 ML1469
Product Description
Full Text Search
 

To Download MF-2700FRB-M0XMA Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 Mitsubishi Electric Corp. Datasheet
DESCRIPTION This product is designed to provide high optical performance for SDH STM-16 / SONET OC-48. Receiver uses APD pre-amp module and integrated circuits for re-shaping and re-generating (2R) optical signal.
MITSUBISHI (OPTICAL DEVICES)
MF-2700FRB-M0XMA
SONET / SDH RECEIVER MODULE
FEATURES * Full SONET/SDH line up * Multi rate (155Mb/s to 2.7Gb/s) * Compact, low power * +5V single power supply * DC/DC converter built in * Case Temperature Range: -5 to +75deg.C * Multi Source Agreement
APPLICATION Short haul and long haul digital optical communication systems for SDH STM-16 / SONET OC-48. SDH : L-16.1, L-16.2 SONET : LR-1, LR-2
UQ9-04-007
Ed:1.0
Date:22.Dec.2004 Page 1 of 8
MITSUBISHI (OPTICAL DEVICES)
MF-2700FRB-M0XMA
SONET / SDH RECEIVER MODULE
Absolute Maximum Ratings
Stress below listed absolute maximum rating may cause permanent damage to the module. This is a stress only and functional operation of the module at these or any other conditions in excess of those given in the operational sections of this data sheet . Exposure to Absolute Maximum Rating for extended periods may affect module reliability. Tc=25deg.C. Parameters Supply voltage LPA, OIL output current DTV input voltage Storage temperature Operating case temperature Soldering Temperature Soldering Time Relative humidity(non condensation) Fiber bend radius Symbol Vcc Tstg Tc Ratings +6.0 +/- 20 0 to Vcc -40 to +85 -5 to +75 +250 10 10 to 80 30 Unit V mA V deg.C. deg.C. deg.C. sec % mm
Block diagram
DC/DC
APD control Amplifier Monitor Comparator APD OPT.IN Decider Preamp DATA out AGC amp DTV in APD-Preamp Module LPA out OIL out
DATA out
UQ9-04-007
Ed:1.0
Date:22.Dec.2004 Page 2 of 8
MITSUBISHI (OPTICAL DEVICES)
MF-2700FRB-M0XMA
SONET / SDH RECEIVER MODULE
Electrical and Optical characteristics
All parameters are specified over the operating case temperature. Measurement conditions are at NRZ PN223-1 and 50% duty cycle data signal.
Electrical characteristics
Parameters Conditions Symb Min. +4.75 0.155 0.25 0.5 2.4 0 Typ. L-16.x / LR-x +5.0 1.5 5V PECL 0.4 0.8 130 2000 80 Max. +5.25 2.5 2.7 1 2 180 1 5 Vcc 0.5 Units V W Gb/s Vpp Vpp ps ms ms V V mV mV
ITU-T/SONET Positive supply voltage Vcc Power consumption P Bit rate Data output logic Fig.1 Output data voltage single ended SV Output data voltage differential DV Output data rise and fall time 20-80%, Fig.2 Tr / Tf LPA activation time Tact LPA de-activation time Tdeact LPA output high voltage Fig.3 Voh (LPA activate) LPA output low voltage Fig.4 Vol (LPA de-activate) OIL output high voltage note 1, Fig.4 OIL output low voltage note 2, Fig.4 note 1 : Measured at -8dBm optical input power. note 2 : Measured at -28dBm optical input power.
Optical characteristics
Parts Number MF-2700FRB-M02xx MF-2700FRB-M03xx Parameters Conditions Symb. Min. Typ. Max. Min Typ. Max ITU-T/SONET L-16.1/LR-1 L-16.2/LR-2 Optical budget 10 24 10 24 Wavelength 1280 1310 1335 1500 1530 1580 Optical fiber type Single mode fiber Single mode fiber Receiver sensitivity note 3 Rsen -29.5 -27.5 -30.5 -28.5 Receiver overload note 3 Rovr -8 -7 -8 -7 Path penalty 0.2 1 1.3 2 LPA activation level -36 -36 LPA hysteresis No chattering No chattering Maximum reflectance -27 -27 note 3 : Measured at BER 10-10. DTV is left open for MF-2700FRB-M02xx / M03xx. Units dB nm dBm dBm dB dBm dB
UQ9-04-007
Ed:1.0
Date:22.Dec.2004 Page 3 of 8
MITSUBISHI (OPTICAL DEVICES)
MF-2700FRB-M0XMA
SONET / SDH RECEIVER MODULE
Ordering information
L-16.1 / LR-1 : MF-2700FRB-M02MA (MU type optical connector) L-16.2 / LR-2 : MF-2700FRB-M03MA (MU type optical connector)
Pin Allocation
No. 1 2 3 4 5 6 7 8 9 10 11 12 Symbol NIC NUC LPA GND NIC NIC GND VCC GND Do+ DoGND Description No internal connection No user connection Loss of Power Alarm Ground 1) No internal connection No internal connection Ground 1) Positive power supply Ground True data output False data output Ground 1)
2)
No. 24 23 22 21 20 19 18 17 16 15 14 13
Symbol NUC OIL VCC NUC GND GND NIC GND GND GND GND DTV / NIC
Description No user connection Optical Input Light Voltage Positive power supply No user connection Ground 1) Ground 1) No internal connection Ground 1) Ground 1) Ground 1) Ground 1) Decision Threshold Voltage 3)
1) : Package is at same potential as GND . 2) : LPA output is a logic level that indicates the presence or absence of a sufficient optical input level. A logical high level indicates an input optical level is too low. 3) : DTV (0.5 to 3.5V). This pin is left open if the amplitude decision threshold is not made adjustable.
UQ9-04-007
Ed:1.0
Date:22.Dec.2004 Page 4 of 8
MITSUBISHI (OPTICAL DEVICES)
MF-2700FRB-M0XMA
SONET / SDH RECEIVER MODULE
General Outline Drawing
NOTE : DIMENSIONS ARE IN MILLIMETERS NOTE : TOLERANCES UNLESS NOTED +/- 0.5 mm NOTE : THIS DRAWING IS IN CASE OF FC CONNECTOR.
MU CONNECTOR
UQ9-04-007
Ed:1.0
Date:22.Dec.2004 Page 5 of 8
MITSUBISHI (OPTICAL DEVICES)
MF-2700FRB-M0XMA
SONET / SDH RECEIVER MODULE
APPLICATION NOTES
Fig.1 : Data Output interface
Output stage
Data Output (5V PECL)
Coupling Capacitor 270ohm 270ohm 50ohm 50ohm
Customer logic reference
Fig.2 : Data Output Rise / Fall Time
80% Do+ / 20%
Tr
Tf
UQ9-04-007
Ed:1.0
Date:22.Dec.2004 Page 6 of 8
MITSUBISHI (OPTICAL DEVICES)
MF-2700FRB-M0XMA
SONET / SDH RECEIVER MODULE
Fig.3 : Loss of Power Alarm interface
ON Receiver
OFF
Optical Input LPA
LPA TTL
Fig.4 : Optical Input Light Voltage interface
Receiver
Op-amp
OIL
> 5kohm
UQ9-04-007
Ed:1.0
Date:22.Dec.2004 Page 7 of 8
MITSUBISHI (OPTICAL DEVICES)
MF-2700FRB-M0XMA
SONET / SDH RECEIVER MODULE
Typical performance
Data Output Waveforms (2.7Gb/s)
BER Curve (2.7Gb/s, L16.2/LR-2)
1E-3
1E-4
1E-5
Bit Error Rate
1E-6
1E-7
1E-8 1E-9 1E-10 1E-11 1E-12 -40 -39 -38 -37 -36 -35 -34 -33 -32 -31 -30 -29 -28 -27 -26 -25
Optical Input Power (dBm)
This product is sensitive to electrostatic discharge. Take precautions to prevent ESD; use wrist straps, grounded work surfaces and recognized anti-static techniques when handling.
Mitsubishi reserves the right to change the circuitry and specifications without notice at any time. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
The end of document
UQ9-04-007 Ed:1.0 Date:22.Dec.2004 Page 8 of 8


▲Up To Search▲   

 
Price & Availability of MF-2700FRB-M0XMA

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X